English
Español
Português
Description
Our factory can tailor various kinds of Planting Pots Injection Molds for each customers as per their requirements. The quotation can be made based on drawing or samples provided by the customers, our products are both excellent in quality and reasonable in price. Your satisfaction is guarantee.
Tips to Reduce Plastic Flower Pot Mould Costs
Probably one of the most common reasons for using plastics in tools is to reduce the cost of the Plastic Flower Pot Mould making. The following recommendations can frequently help reduce costs to a minimum:
Simplify flower pot mould design. A mould design consisting of word descriptions and sketches in conjunction with the part print eliminates the need for a complicated, completely dimensioned drawing, and may be the first step toward cost reduction. For example, drill jigs made of glass-reinforced plastics laminates and used to drill holes in shaped sheet metal parts are frequently made from a sample part which has the holes drilled in their correct location. Directions for such a tool might consist of a free-hand sketch, or markings on the part itself with a written description specifying laminate thickness and the size and type of drill bushings required.
Build new models to male shape. When master models have to be made, build them in a manner easiest to duplicate (usually a male shape), and to the side-of-metal that requires the least amount of transference of part thickness.
Use flat run-outs. Flat run-outs are easiest to build, and should be used wherever possible.
Eliminate undercuts and loose pieces. Remember that in reproducing a shape in plastics, the plastic flow pot shape must be removed from the model. Wherever possible, eliminate all undercuts and loose pieces, simplifying shape reproduction.
Use lattice-type laminates. Lattice-type laminate structures should be used wherever possible instead of solid structures. Lattice structures require less material and less labor, and are lighter in weight.
Use fillers in plastics flow pot tooling materials. Where relatively large masses of plastics are required and strengths are not critical, fillers can increase the yield of the relatively expensive plastics materials.
